ECUtuner Windows Application

• Definition files available for most OBD1 Subaru vehicles
• Definition files can be modified to configure for other control units
• Can monitor all select monitor parameters
• Can check and clear trouble codes
• Can download firmware from control unit
• Runs on any laptop with Windows, .Net, and a USB Port
• Requires an ECUtune OBD1 interface and FTDI USB cable
• Free to use and more features coming

ECUtuner Application
June272010Release.zip

Most versions of Microsoft Windows come with Microsoft .Net pre-installed as part of the Operating system.  The latests Windows operating systems come with Microsoft .Net 4.0 or 4.5 which do not include the previous versions 2.0, 3.0, and 3.5 which are required by many .net applications including ECUtuner.  If you have one of these newer computers you will need to install .Net 3.5 with service pack 1 which includes the previous versions.  This does not replace your newer version of .Net; it gives you support for all versions of .Net from 2.0 on.  You can download .Net 3.5 with service pack 1 from Windows update or from the Microsoft download center here: http://www.microsoft.com/en-us/download/details.aspx?id=22
 

Forum links--go here to learn & get assistance from others
No direct support is offered--join a public forum to get assistance
Forum for SVX Owners: Subaru SVX World Network
Forum for OBD1 Legacy Owners: Legacy Central BBS

The ECUtuner application requires an ECUtune OBD1 interface and  FTDI TTL-232R-5V USB Cable.  Purchase the OBD1 select monitor interface below and the TTL-232R-5V directly from http://www.ftdichip.com/Products/Cables/USBTTLSerial.htm

OBD1 Select Monitor Interface

• Provides rock solid communications over Select Monitor Port
• Comes with Subaru Select Monitor plug
• Plugs directly into FTDI TTL-232R-5V USB Cable